Design and function
MIG/MAG welding
099-005403-EW501
10.2.2022
45
Display
Setting/selection
Switch on
Switching on machine function
Switch off
Switching off machine function
5.3.7.5 Burn-back
The wire burn-back parameter prevents the sticking of the wire electrode in the weld pool or at the contact
tip at the end of the welding process. The value is optimally preset for a variety of applications (but can be
adjusted if necessary). The adjustable value stands for the time until the power source switches off the
welding current after the welding process has been stopped.
Welding wire behaviour
Setting instructions
Wire electrode is sticking in the weld pool.
Increase value
Wire electrode is sticking on the contact tip or large ball forma-
tion on the wire electrode
Reduce value
ENTER
EXIT
3s
Figure 5-29
Display
Setting/selection
menu burn back
Set burn back
