Functional characteristics
Machine configuration menu
099-M183xB-EW501
18.7.2022
35
5.5
Machine configuration menu
5.5.1
Selecting, changing and saving parameters
B
l
0
B
A
Figure 5-26
Display
Setting/selection
Calibration
The machine will be calibrated for approx 2 seconds each time it is switched on.
Exit the menu
Exit
Machine configuration
Settings for machine functions and parameter display
Dynamic power adjustment > see 7.4 chapter
Time-based power-saving mode > see 5.6 chapter
Time to activation of the power-saving mode in case of inactivity.
Setting
= disabled or numerical value 5-60 min..
Arc detection for welding helmets (TIG)
Modulated waviness for better arc detection
--------Function enabled
-------Function disabled
Service menu
Any changes to the service menu should be agreed with the authorised service person-
nel.
Software version of the machine control
Version display
