Intended use
Applications
099-008109-EW501
06.07.2012
9
3 Intended
use
This machine has been manufactured according to the latest developments in technology and current
regulations and standards. It must only be operated in line with the instructions on correct usage.
WARNING
Hazards due to improper usage!
Hazards may arise for persons, animals and material objects if the equipment is not
used correctly. No liability is accepted for any damages arising from improper usage!
• The equipment must only be used in line with proper usage and by trained or expert staff!
• Do not modify or convert the equipment improperly!
3.1 Applications
During air arc gouging, bad welding seams are heated with a carbon electrode and then removed with
compressed air. Special electrode holders and carbon electrodes are required for air arc gouging.
3.2
Use and operation solely with the following machines
Gouging torch
• GT 1000 SKK95 3M
Remote control
•
RG12
Welding current leads
• WK
120QMM-6M/Z
• EL
120QMM-6M/M12
