Functional characteristics
MIG/MAG welding
099-0M37XS-EW501
31.8.2022
25
5.4.4 Welding power (operating point)
This control uses the principle of twin-knob operation. To specify the operating point, only the wire feed
speed and the welding voltage are selected according to the type of material, shielding gas, material
thickness, and wire diameter (see also table setting instructions in the Appendix
> see 8.1 chapter
).
Example of use:
1.
Material type: Solid wire SG2/3
2.
Shielding gas: Ar-82 / CO
2
-18 (M21)
3. Materialdicke: 3,0 mm / 0.12 inch
4.
Wire diameter: 1,0 mm / 0.04 inch
5. Wire feed speed: 5,1 m/min / 201 ipm
Welding voltage: 19,0 V
Figure 5-7
