Machine description
– quick overview
Machine control
– Operating elements
099-005507-EW501
13.09.2018
17
Item Symbol
Description
0
6
Rotary knob, welding parameter setting
• ----------- Setting the welding task (JOB). With machines of the Phoenix Expert series,
welding tasks are selected at the power source control.
• ----------- Setting the welding power and other welding parameters.
7
Operating modes push-button (functional sequences)
> see 5.4.10 chapter
-------- Non-latched
------- Latched
--------- Signal light turns green: Special non-latched
---- Signal light turns red: MIG spots
8
Welding type push-button
-------- Standard arc welding
---- Pulsed arc welding
9
Push-button, throttling effect (arc dynamics)
Arc is harder and more narrow
----- Arc is softer and wider
10
Arc length correction/selection of welding program, rotary dial
• ----------- Correction of the arc length from -9.9 V to +9.9 V.
• ----------- Selection of welding programs 0 to 15 (not possible if accessory components,
such as program torches, are connected).
11
Button, Parameter selection (right)
VOLT ---- Welding voltage
Prog ----- Program number
kW ------- Welding performance display
------- Gas flow quantity (optional)
12
Display, right
Welding voltage, program number, motor current (wire feed mechanism)
13
Push-button gas test / rinse hose package
> see 5.1.7 chapter
14
Push-button, wire inching
Potential- and gas-free inching of the wire electrode through the hose package to the
welding torch
> see 5.4.2.4 chapter
.
4.4.1
Functional sequence
Figure 4-5
Item Symbol
Description
0
1
Select welding parameters button
This button is used to select the welding parameters depending on the welding process
and operating mode used.
