Design and function
Transport and installation
20
099-005630-EW501
02.03.2021
5.1.4 Transport belt
5.1.4.1 Adjusting the length of the carrying strap
Figure 5-2
5.1.5 Dirt filter
These accessory components can be retrofitted as an option
> see 9.4 chapter
.
When using a dirt filter, the cooling air throughput is reduced and the duty cycle of the machine is reduced
as a result. The duty cycle decreases with the increasing contamination of the filter. The dirt filter must be
remove at regular intervals and cleaned by blowing out with compressed air (depending on the level of
soiling)
> see 6.3.2 chapter
.
5.1.6 Welding torch cooling system
WARNING
Risk of accidents due to improperly connected modules!
Improperly installed modules may come loose and cause severe injuries.
• Remove impurities from the connection points before installation!
• All plug and screw connections must be carried out properly and completely!
