Design and function
Protecting welding parameters from unauthorised access
099-005366-EW501
31.07.2014
47
5.15 Protecting welding parameters from unauthorised access
To protect against unauthorised or unintentional adjustment of the welding parameters on the machine,
the control input can be locked with the aid of a key switch.
In key switch position 1 all functions and parameters can be set without restriction.
In key switch position 0 the following functions and parameters cannot be changed:
5.15.1 Welding data display
To the left and right of the LCD display on the control there are 2 “arrow keys” on each side for selecting
the welding parameter to be displayed. The
button is used to scroll through the parameters from the
bottom upwards and the
button is used to scroll downwards from the top.
As soon as changes have been made to the settings after welding (display on hold values) the display
switches back to the nominal values.
Figure 5-16
Parameter
Before welding
During welding
After welding
Nominal value
Actual value
Nominal
value
Hold
value
Nominal
value
Welding current
Material thickness
Wire speed
Welding voltage
Motor current
JOB no.
Operating time
Summary of Contents for alpha Q 352 puls MM
