4
Assembling ready for use
The Ewbank VC600 4 can be used as a handheld
vacuum cleaner and as an upright stick-vac.
Floor brush and crevice tool accessories can
be added by inserting the required accessory
into the waste chamber inlet. Simply insert
the accessory in a straight line into the waste
chamber inlet
(Fig. 1).
We recommend a light spray of polish or other
lubricant spray into the inlet of the waste
chamber to make this easier. Do not twist either
the Ewbank VC600 or the accessory while
inserting or removing an accessory.
Extension handle
The extension handle can be added to convert
the Ewbank VC600 to a stick vacuum.
The handle and extension wand are delivered
disconnected inside the product packaging. To
assemble the extension handle, pull the pin from
the handle by unscrewing it until it comes away
completely. Next fit the handle onto the shaft so
that the holes in the shaft match the holes on
the handle. Ensure the single hole on the other
end faces forwards. Attach the hook and screw
the pin all the way in
To attach the extension handle to the body of
the VC600, hold the vac body by its handle and
push the extension handle into the body
(Fig. 2).
Push the handle in until an audible “click” is
heard. To remove the handle, fully depress
button
‘A’ on the top of the unit and pull the handle out
of the hole, releasing the button once the handle
is clear of the unit.
To remove, pull out in a straight line.
Remember to ensure the filter and pre-filter are
fitted before use
Fig 1. Inserting an accessory
Simply insert your accessory
into the waste chamber inlet.
Fig 2. Inserting and releasing
the handle
Push the handle in until an
audible ‘click’ is heard.
Press button A to release
handle.
A
