background image

·

·

Always disconnect the appliance from the 
power supply before cleaning the appliance, 
or attempting repairs.

WARNING:

Repairs should be performed by qualified 
service personnel only.
Do not defrost the appliance with other electric
appliances (for example a hair dryer) and  
never attempt to scrape/remove ice/frost with 
sharp objects.
The cooling system of the appliance is filled 
with refrigerant and oil ,so when the appliance
is damaged, handle it with care and dispose 
of it in compliance with environmental 
protection safeguards.
The rating plate containing Model No and
other technical data specific to this unit, is 
located either inside the appliance or outside  
on the rear wall.

To avoid risk of child entrapment, leave the 

The appliance must be properly connected to

Do not use an extension cord.

Important

routine use or not in use at home.

shelves in place so children can not easily
climb inside even when the appliance is in 

to Power Supply) .

an electrical power supply. (See: Connection 

The cooling system of the appliance is filled with 

3

If you have bought this appliance to replace        

it impossible for children to accidentally lock 

an old one equipped with a door lock that 
cannot be opened from the inside (lock, bolt),
make sure that the lock is removed, disabled 
or destroyed before discarding. This will make

themselves inside the appliance and suffocate.

distributor. Be careful not to damage the tubes on
the rear wall of the appliance (danger of pollution).

refrigerant and insulating substances which should

to locate one, contact your local authorities or your

be separately treated and processed. Call your

nearest authorised service agent. If you are unable

Disposing of Worn Out Appliances

 - Leave the shelves in place so children may not
easily climb inside.

DANGER OR WARNING:

 Risk of child entrapment.

Before you throw away your old refrigerator or 
freezer:
 -Take off the doors

Summary of Contents for EWWC16MCG













Reviews: