background image

·

Before connecting the appliance to electrical     

power supply, leave it to stand for about 4 hours, 

which will reduce the possibility of malfunctions  
in the cooling system due to transport handling.

·

Clean the appliance thoroughly, especially in the 
interior (See Cleaning and Maintenance).

·

In case the interior accessories are not correctly
placed, rearrange them as described in chapter
"Description of the Appliance".

.

Instructions for Use

These instructions for use are intended for the user.

.

They describe the appliance and correct operating
procedures for safe use .

SAVE THESE INSTRUCTIONS:

·

Try not to open the door too often, especially when 
the weather is hot and humid. Once you open  the 
door , close  it  as  soon  as  possible. This  is
especially important if you have an upright model .

·

Every  now  and  then  check if  the appliance  is 
sufficiently ventilated ( adequate  air  circulation
behind the appliance ).

·

Set the thermostat from higher to lower settings as
soon as possible (depends on how loaded the
appliance is, ambient temperatures etc.).

·

If the gasket is damaged or the door seal is poor, 
energy consumption is substantially higher. To
restore efficiency, replace the gasket.

·

Always consider instructions stated in sections 
Positioning and Energy Saving Tips, otherwise
the energy consumption is substantially higher. 

Tips for Energy Saving

screwdriver.

for EWWC16MCG &

 EWWC30MCG )

2

Before Putting Into Use

Before Putting Into Use

Before Putting Into Use

Before Putting Into Use

To save shipping space and avoid damage of
the unit during transportation, the door handle 
of this unit is shipped unassembled. Before 
putting the unit into use you are kindly asked to
assemble the door handle as follows:
Locate the door handle and 2 screws attached
inside the cabinet, and prepare an appropriate

To Assemble Door Handle

(Door handle assembling

With the 2 screws attached, fasten the door

illustrated. Be sure that the screws must point

when doing so.

handle onto the frame of the door panel as

to the holes on the frame of the door panel 

Summary of Contents for EWWC16MCG













Reviews: