PRODUCT INSTALLATION
SQUID-HC-LORAWAN Technical Documentation
6
wattch
RISK OF ELECTROCUTION, EXPLOSION
OR ELECTRICAL ARC
Disconnect all power supplies before working on the equipment.
Manufacturer cannot be held responsible for failure by user to comply with
the instructions in this manual.
Installation of the sensor
Mounting and disassembly
Prerequisite
This equipment must be installed on a DIN 35mm rail mounted horizontally on the
electrical panel.
Make sure to snap the box properly into the DIN rail.
Make provision for the location of 5 modules to install the product on the electrical
panel. To disassemble, use a flat head screwdriver to loosen the clip
A 5V DC-2A power supply must be placed in the lead, before coming to supply the
SQUID. The wiring of the Extra Low Voltage Safety circuits must be maintained and
kept separated from circuits carrying hazardous voltages.
1
2
1
POWER
SUPPLY
5V DC