198
KPM.X.Systemhandbuch_X3.0.EN.V1.9 | Subject to misprints and technical changes.
8.19
Force component removal (component faulty)
If a component is faulty, go to Access points and select the corresponding installation
location. Scroll down to the EVVA component and select "Remove faulty EVVA component".
Figure 243 - Component defective - force removal
8.20
Online wall reader
Figure 244264
–
Online wall reader
Online wall readers provide the following functions:
•
Updating identification media
•
Blacklist in real time
•
Access event log in real time
•
Component authorisation update in real time
•
Identifying EVVA component: wall reader you searched for repeatedly outputs vis-
ual and audible signal until the function is deactivated.
•
Activating Office Mode: Starts Manual Office Mode (recorded)
•
Deactivating Office Mode: Closes Manual Office Mode (recorded)
•
Set time: manual time synchronisation using online wall reader (e.g. after power
cut = offline) (recorded).
•
Remote opening: use online wall readers to remotely open components and record
the action:
-
A normal release (standard release duration is logged)
-
Extended release duration is logged (e.g. for users with restricted mobility)
