44
Xe
sar
Sy
st
em
manu
al
2
.0
f
or
v
er
si
on
2
.0
.3
6.1
7
| 2
4.
06
.2
01
5
| mi
spr
int
ing
and
te
chni
cal
c
hange
s
re
se
rv
ed
Xesar handle — functional description
Figure 18: Xesar handle (sample image)
Visual and acoustic feedback:
Xesar handles indicate events acoustically and visually. For this purpose, there is an LED on
the upper edge of the reader unit of Xesar handles. For a list of all signals please refer to
Section:
Reader unit:
The reader unit sensor is located on the outside of the Xesar handle between the con-
nector (EVVA logo) and the LED.
Connector (synchronisation, updates, emergency power supply)
Xesar handles feature a connector located under the connector cover (EVVA logo). Slightly
press towards the inside on the left-hand side of the EVVA logo (near the "E") and fold out
on the right-hand side (near the "A") to access the connector.
The connector is intended for synchronisation with Xesar tablets as well as for emergency
power supply using the optional emergency power device.
After use, once again carefully close the connector cover (EVVA logo) to protect the con-
nector from penetrating dust and humidity. For this purpose, do not use pointed objects
to prevent damage.
Summary of Contents for Xesar 2.0
Page 1: ......