200
Xe
sar
Sy
st
em
manu
al
2
.0
f
or
v
er
si
on
2
.0
.3
6.1
7
| 2
4.
06
.2
01
5
| mi
spr
int
ing
and
te
chni
cal
c
hange
s
re
se
rv
ed
Note:
An acoustic and visual (four yellow flashes) battery low message will appear approx-
imately 1,000 actuations or four weeks before the battery is empty.
Battery replacements:
Always replace batteries with batteries that have been approved by EVVA. Do not
use rechargeable batteries. Rechargeable batteries typically demonstrate a different
discharge curve and cause premature "Battery status: low" messages.
Note:
When replacing the batteries the date and time is lost as a result of the lack in
power after the following periods:
-
Xesar escutcheon > 1 minute
-
Xesar cylinder > 1 minute
-
Xesar handle > 1 minute
Test whether the date and time settings have been lost by attempting to operate
the access component using an authorised identification medium after having re-
placed the batteries. Identification media will be unable to unlock the door if the
date and time settings have been lost. In this case, you must transfer the date and
time settings using the Xesar tablet. Test the component operates correctly
before
closing the door. If the date and time setting is lost, even identification media with
MasterKey authorisation will be unable to operate the access component.
Additional maintenance tasks
Regularly service Xesar access components and in this process, synchronise the
information with the Xesar software.
The following tasks must be completed directly at the Xesar access component as part of on-
going maintenance tasks:
Xesar tablet error messages
Incorrect handling may cause a host of different error messages. This section provides an overview
and gives some tips to prevent said errors:
Summary of Contents for Xesar 2.0
Page 1: ......
