EVVA AirKey System Manual Download Page 127

Page: 127 / 217

127

Air

yst

ech

ical

res

ved

5.9.3

System protocol

In the main menu, select

Protocols > System

An overview of all actions implemented by administrators appears.

In the search field



you can search for administrators, user names, implemented

actions, transaction IDs or media and component IDs. Enter a certain period



and

determine the column by which you would like to sort



Enter a date in the Go to field



to browse directly to a certain date. The next data

set is shown if there are no entries for the entered data.

Figure 154: System protocol

It is not possible to delete protocol entries from the system protocol.

5.10

Support logins

Enabling support logins allows you to create temporary administrators in the event that
you need support for AirKey. Users can view all locking system data with support logins.

Persons with support logins are granted administrator authorisations during
the validity period.

Summary of Contents for AirKey


























































































































































































































Search results

Summary of Contents for AirKey

Reviews:

EVVA AirKey, System Manual, Page: 127 / 217

Search results

Summary of Contents for AirKey

Reviews: