EVVA AirKey System Manual Download Page 109

Page: 109 / 217

109

Air

yst

ech

ical

res

ved

Click

Change access



Figure 135: Changing access

You must have credit on your account to change authorisations.

Click Create authorisation. Please refer to the

Creating authorisations

section for more

detailed information.

Update the medium to complete the process.

5.8.8

Deleting authorisations

You can delete any assigned authorisations if they are no longer required.

In the main menu, select

Media & Persons > Media

Select the medium from the overview list for which you would like to delete authori-
sations.

In the "Authorisation" tab, click the authorisation you would like to delete or drag and
drop the door/area from the centre to the

Delete authorisation

field.

Click

Delete authorisation



Summary of Contents for AirKey


























































































































































































































Search results

Summary of Contents for AirKey

Reviews:

EVVA AirKey, System Manual, Page: 109 / 217

Search results

Summary of Contents for AirKey

Reviews: