EVS XSnano, Configuration Manual

Page: 58 / 198

3.1.3. Navigating and Editing in the Multicam
Configuration Window
In the Server-Based Application
Navigation Commands
The following table presents the commands to navigate in the Multicam Configuration
window:
Command description Command key
Selecting a given tab CTRL + tab number
Moving from one tab to the other
(when the tab is selected, i.e. rose highlighted) LEFT ARROW / RIGHT
ARROW
Moving down/up in the pages of the active tab PAGE DOWN or PAGE UP
Moving down in the list of editable settings TAB
Moving up in the list of editable settings SHIFT + TAB
Toggling between Basic and Advanced display mode F3
Editing Commands
The following table presents the commands to edit the configuration settings in the
Multicam Configuration window when the field has been selected (using the
TAB key).
In text fields, you can directly type the requested value for a selected field.
Command description Command key
Increasing the value
(or displaying the next value in the list) SPACEBAR
Decreasing the value
(or displaying the previous value in the list) SHIFT+SPACEBAR
Moving the cursor position within a text field SHIFT+ RIGHT ARROW /
LEFT ARROW
Resetting the value of the selected setting F5
Resetting all values of all settings in the current tab
for the selected configuration
CTRL+F5
Resetting all values of all settings in all tabs for the
selected configuration
CTRL+SHIFT+F5
Applying changes ALT+A
Leaving without applying changes ESC , ENTER
48 3. Multicam Configuration
EVS Broadcast Equipment SA Issue 12.02.C - April 2014