manualshive.com logo in svg

EVS XSnano, Configuration Manual

The EVS XSnano Technical Reference Hardware Manual is a valuable resource for users seeking in-depth knowledge about the product. This comprehensive manual provides detailed instructions and insights on the device's features and functionalities. Download it for free from our website to enhance your understanding of the EVS XSnano.

Share
Download
background image

4.1.3.

Raid and Disk Status Window

Introduction

The second page gives information on the disks or raids from internal and/or external
storage.

Raid Type

The Raid type section displays the number of raids, the type of raid (

4+1

or

5+1

) and the

number of spare disks. This information cannot be modified.

Raid Status

This section displays each raid by its number and uses a color code to display its status.
See section "Disk Status" on page 173 for more information on the disk statuses.

When a raid is rebuilding, the percentage rebuild is displayed instead of the raid number.
This value shows the progress of the rebuild process. See section "Rebuild Process" on
page 39 for more information on the rebuild process.

172

4. Monitoring

EVS Broadcast Equipment SA

Issue 12.02.C - April 2014

Summary of Contents for XSnano







































































































































































































Reviews:

No comments

Related manuals for XSnano

IBM 610 Technical Overview And Introduction preview
610
Brand: IBM Pages: 40
Galleon NTS-4000-R Installation And Configuration Manual preview
NTS-4000-R
Brand: Galleon Pages: 35
Galleon NTS-6001 Configuration Manual preview
NTS-6001
Brand: Galleon Pages: 47
IBM ProtecTIER DD6 Instructions Manual preview
ProtecTIER DD6
Brand: IBM Pages: 10
Supero SUPERSERVER 5017C-MF User Manual preview
SUPERSERVER 5017C-MF
Brand: Supero Pages: 96
Avaya INTUITY AUDIX LX Getting Started Manual preview
INTUITY AUDIX LX
Brand: Avaya Pages: 68
Supermicro 7044H-82 User Manual preview
7044H-82
Brand: Supermicro Pages: 124
Lenovo and 1040 Hardware Maintenance Manual preview
and 1040
Brand: Lenovo Pages: 186
Lenovo 42U 1200 mm Deep Dynamic Rack Installation Manual preview
42U 1200 mm Deep Dynamic Rack
Brand: Lenovo Pages: 42
Lenovo 104614U User Manual preview
104614U
Brand: Lenovo Pages: 32
Lenovo 30131AU - IdeaCentre D400 - 3013 User Manual preview
30131AU - IdeaCentre D400 - 3013
Brand: Lenovo Pages: 65
Lenovo Storage N4610 User Manual And Hardware Maintenance Manual preview
Storage N4610
Brand: Lenovo Pages: 176
Lenovo 5468 Setup Manual preview
5468
Brand: Lenovo Pages: 90
Lenovo 1909 Installation And User Manual preview
1909
Brand: Lenovo Pages: 141
Lenovo 098118U Installation And User Manual preview
098118U
Brand: Lenovo Pages: 96
Lenovo 102912U Installation And User Manual preview
102912U
Brand: Lenovo Pages: 154
Lenovo 098118U Brochure & Specs preview
098118U
Brand: Lenovo Pages: 4
QNAP TS-230 User Manual preview
TS-230
Brand: QNAP Pages: 44

Brands by name

Popular brands

Load more brands