EVS Synapse UXU500, Installation And Operation Manual, Page: 37 / 72

#Input-Matrix
(UXU500-510
only)
With this setting you can specify the color container standard of the input video.
The setting can be set to Rec.709 (HD) or Rec. 2020 (UHD). Default is Rec.709.
#Input-Norm
(UXU500-510
only)
This setting determines the LUT input normalisation. Full normalizes 0-1023 to 0-1.
In the case of Narrow it normalizes the smpte range which is 64-940 to 0-1 for the
luma range, and 64-960 to 0-1 for the chroma range. If the LUT is designed for full
range, set to
Full . If it is designed for smpte/narrow range, set it to Narrow .
#1D_LUT_Pre
(UXU500-510
only)
This setting controls the 1D LUT before the 3D LUT and the matrix converter.
There are 16 preset locations where a 1D LUT file can be uploaded to using ftp or
webDAV.
#3D_LUT
(UXU500-510
only)
This setting controls the 3D LUT. There are 16 preset locations where a 3D LUT file
can be uploaded to using ftp or webDAV.
#Output-Matrix This setting will only work if S352_Insert is set to On. It enables you to set the
colorspace in REC709 (default) or REC2020. When set to either REC709 or
REC2020, the S352 data is included in the s352 packet. (This does not change
anything in the picture.)
The setting 2020to709 clips colors that are out of bounds of the BT.709 color space.
#Matrix_Conv
(UXU500-510
only)
This setting controls the color conversion to convert between the ITU BT.709(HD)
and BT.2020(UHD) recommendations by using a matrix conversion. This matrix
conversion does not specify the color space container, unlike the input and output
matrices. The settings are 709to2020, 2020to709 and Transparent. Default is
Transparent.
#1D_LUT_Post
(UXU500-510
only)
This setting controls the 1D LUT after the 3D LUT and the matrix converter. There
are 16 preset locations where a 1D LUT file can be uploaded to using ftp or
webDAV.
#HDR_Curve_Out The dynamic range is the range of information between the lightest and darkest
part of an image, also known as an image’s luminosity. This setting enables you to
set the dynamic range in standard dynamic range SDR (default), HLG, PQ or
SLOG3. With all of these settings, the S352 data is included in the S352 packet.
(This does not change anything in the picture.)
#Output-Norm
(UXU500-510
only)
Determines the LUT output normalisation. Full normalizes 0-1023->0-1. In the case
of Narrow it normalizes the smpte range which is 64-940 -> 0-1 for the luma range
and 64-960->0-1 for the chroma range. If the LUT is designed for full range, set to
Full . If it is designed for smpte/narrow range, set it to Narrow .
#Bit_Depth_Out Bit depth is the range of bits being used. This setting enables you to set the bit
depth to Narrow (8bits) or Full (10bits). When set to either Narrow (default) or Full,
it includes this data in the S352 packet. (This does not change anything in the
picture.)
INSTALLATION AND OPERATION MANUAL
Synapse UXU500-510 | 5. Settings Menu | 29