EVS Synapse UXU500, Installation And Operation Manual, Page: 32 / 72

Ins_CtrlA With this item you select how the inserter presets are controlled: Manually
(manual), via GPI-triggers (GPI-A, GPI-B or GPI-C), via changes of the SD
aspect ratio (SD_AR) or the HD aspect ratio (S2016). Default is Manual.
Ins_Prst_ActA With this item you can manually change the currently active preset of
Channel A when in transparent mode. Can be any preset between 1 and 16.
By default it is set to 1. All menu settings that are preceded with a ‘#Ins’-
prefix are part of the preset.
Ins_Prst_EditA Here you can select which of the 16 selectable presets you want to edit
when in a transparent mode. Changing this will not change the active
preset, unless the currently active preset is the same you are going to edit.
All menu settings that are preceded with a ‘#Ins’-prefix are part of the
preset.
#VI-InsertA You can turn VI insertion on or off for Channel A. Default is Off.
#VI-DataA With the #VI-InsertA setting set to On, you can select VI values with this
setting, which you want to be inserted. possible are all VI values from 4:3_0
through 4:3_7 and the settings from 16:9_0 through 16:9_7. Default is 4:3_0.
#WSS-InsertA You can choose which type of WSS data you want to insert with this
setting, or switch WSS insertion entirely off (default value). You can set it to
Standard or Extended.
With the #WSS-InsertA setting set to Extended, you can select WSS extended values from
the #VI-DataA setting, which you want to be inserted. Possible VI settings are 4:3_0 through
4:3_7 and the settings 16:9_0 through 16:9_7. Default is 4:3_0.
#WSS-StndA With the #WSS-InsertA setting set to Standard, you can select WSS
standard values with this setting, which you want to be inserted. possible
are all WSS values from 1_vid through 8_vid and the settings from 1_flm
through 8_flm. Default is 1_vid.
#WSS-ExtndA With the #VI-InsertA setting set to Extended, you can select VI values with
this setting, which you want to be inserted. Possible WSS values are 4:3_0
through 4:3_7 and the settings 16:9_0 through 16:9_7. Default is 4:3_0.
#S2016-InsertA You can turn S2016 (AFD) insertion on or off for Channel A. Default is Off.
S2016-LineA With this setting you select a line in the VBI where the AFD (SMPTE 2016)
data should be written. Lines 0 through 31 are selectable. By default it is set
to line 17.
#S2016-DataA With the #S2016-InsertA setting set to on, you can select AFD values with
this setting, which you want to be inserted. possible are all AFD values from
AFD0 through AFD15.
#CC_Ena_A This setting sets the Closed Captioning transparency for Channel A On or
Off. Default is Off.
24 | November 2021 | Issue 1.1.A