EVS Synapse UXU500, Installation And Operation Manual, Page: 31 / 72

#Tr_H-ScaleA The horizontal scaling of the TV picture of channel A in Transparent mode is set
using #Tr_H-scaleA. #Tr_H-scaleA can be set within the range of 50% to 200% of
the input signal (only used when #Tr_ArcA is set to variable). Default value is
100%.
#Tr_V-ScaleA Sets the vertical scaling of the TV picture of channel A in Transparent mode. Can
be set within the range of 50% to 200% of the input signal (only used when #Up_
ArcA is set to variable). Default value is 100%.
#Tr_H-EnhA With this item you can set the horizontal picture enhancement of channel A in
Transparent mode between 0 and 100%. By default set to 0%.
#Tr_V-EnhA With this item you can set the vertical picture enhancement of channel A in
Transparent mode between 0 and 100%. By default set to 0%.
5.7. Inserter
Setting Description
Timecode_insA Enables/disables the encoding or transcoding of the Timecode.
Set to On will enable the following VITC settings to copy the timecode
information from the input to the output. Set to Off will disable all
embedded timecode data on the output.
Default is On.
VITC_Ln_InA With this setting you can select what line of the input you want to copy the
VITC data from (only when input is SD). Can be any line between line 7 and
line 22. Default is line 19.
VITC_Ln_CtrlA Here you can choose whether you want to select the line, to where you
want to copy the timecode data to, manually (manual) or use the
information in the ATC_DBB package to select the lines (ATC_DBB package
contains information about the line duplication as well). Default is Manual.
VITC_Ln_625A When VITC_Ln_Ctrl is set to Manual, with this setting you can select a line
between 7 and 22 when the output is SD625. Default is line 19.
VITC_Ln_525A When VITC_Ln_Ctrl is set to Manual, with this setting you can select a line
between 7 and 22 when the output is SD525. Default is line 10.
VITC_Ln_DupA When set to On, the VITC line is duplicated to the above selected line + 2
lines.
ATC_Dem_SelA ATC source de-embed selection. Previously, the first ATC found in a field
would be transcoded to the output. Now, the user can select whether to
de-embed LTC_Ln10, VITC_Ln9 or the (default) First ATC found.
ATC_Emb_SelA ATC_Emb_Sel: ATC destination embed selection. Previously, timecode was
transcoded into VITC. Now the user can select whether to transcode to
VITC_Ln9 (default) or LTC_Ln10.
INSTALLATION AND OPERATION MANUAL
Synapse UXU500-510 | 5. Settings Menu | 23