EVS Synapse UXU500, Installation And Operation Manual, Page: 29 / 72

#Cr_ArcA With this item you set the Aspect Ratio of the output of channel A in cross
converter mode. Can be Anamorphic, CenterCut, LBox-16:9, LBox-14:9, PBox-4:3,
PBox-14:9 or Variable (custom set AR, set by H-scale and V-scale settings). The
following table shows the possible aspect ratios.
Setting Result:
Anamorphic With 16:9 source
on 4:3 screens
CenterCut With 16:9 source
on 4:3 screens
LBox-16:9 With 16:9 source
on 4:3 screens
LBox-14:9 With 16:9 source
on 4:3 screens
PBox-4:3 With 4:3 source
on 16:9 screens
PBox-14:9 With 4:3 source
on 16:9 screens
Variable Dependent on Cr H-scale and Cr V-scale
settings.
#Cr_H-ScaleA The horizontal scaling of the TV picture of channel A in cross converter mode is
set using #Cr_H-scaleA. #Cr_H-scaleA can be set within the range of 50% to 200%
of the input signal (only used when #Cr_ArcA is set to variable). Default value is
100%.
INSTALLATION AND OPERATION MANUAL
Synapse UXU500-510 | 5. Settings Menu | 21