EVS Synapse UXU500, Installation And Operation Manual, Page: 25 / 72

#Up_ArcA With this item you set the Aspect Ratio of the output of channel A in up converter
mode. Can be Anamorphic, PBox-4:3, PBox-14:9 or Variable (custom set AR, set
by H-scale and V-scale settings). The following table shows examples of the
possible aspect ratios when the input source is 4:3.
Setting Result on 16:19 screens:
Anamorphic
PBox-4:3
PBox-14:9
Variable Dependent on Up H-scale and
Up V-scale settings.
Anam-702 Anamorphic scaling based on
702 active pixels, instead of 720
pixels
#Up_H-ScaleA The horizontal scaling of the TV picture of channel A in up converter mode is set
using #Up_H-scaleA. #Up_H-scaleA can be set within the range of 50% to 200%
of the input signal (only used when #Up_ArcA is set to variable). Default value is
100%.
#Up_V-ScaleA Sets the vertical scaling of the TV picture of channel A in up converter mode. Can
be set within the range of 50% to 200% of the input signal (only used when #Up_
ArcA is set to variable). Default value is 100%.
#Up_H-EnhA With this item you can set the horizontal picture enhancement of channel A in up
converter mode between 0 and 100%. By default set to 0%.
#Up_V-EnhA With this item you can set the vertical picture enhancement of channel A in up
converter mode between 0 and 100%. By default set to 0%.
#Up_ColorConvA ColorConvA optimizes the color conversion for Channel A in up converter mode.
As the color coding of HD (709) and SD(601) are different, it is necessary to
convert these when Channel A is up-converting. The best result is generated
when the up-converter is active and the 601to709 setting is selected. It is also
possible to switch the filter off. The default setting is
Off .
INSTALLATION AND OPERATION MANUAL
Synapse UXU500-510 | 5. Settings Menu | 17