manualshive.com logo in svg

EVS Synapse UXU500, Installation And Operation Manual, Page: 24 / 72

Share
Download
EVS Synapse UXU500 Installation And Operation Manual Download Page 24

S2031_Dec_lnB

With this setting you select from which line of channel B the S2031 data
will be decoded. Can be any line between line 8 (def.) and line 16.

S2031-EmbB

With this setting you set in which line of channel B the S2031 data should
be inserted. Can be any line between line 8 (def.) and line 16.

S2031-WST-defB

This setting is only applicable for a S2031 input source containing
undefined WST lines which are translated to a WST output. WST lines
(which are packetized in S2031) are considered undefined when they
have the line number 0. For such lines, during translation WST is free to
decide in which WST line numbers they will be inserted. In our case the
setting S2031-WST-defB will define the starting WST line number of
channel B, which will be followed continuously by other WST lines. Can
be any line between line 7 and line 22. Default is line 7.

NoWSS/VI_prstA

With this setting you can set to which preset the card should jump
channel A, when no WSS or VI information is found. Can be any preset
between 1 and 16 or Hold (holds current active preset). By default it is set
to Hold.

Input_Loss_A

Here you can set what the output of channel A should be when the input
is lost. Can be Freeze, Colorbar, Zoneplate, Black, Greyor Green.

5.3.

Up-Conv

Setting

Description

Up_CtrlA

With this item you select how the presets for Channel A in up converter mode are
controlled: manually (Manual), via GPI-triggers (GPI, GPI-A, GPI-B or GPI-C), or
via changes of the SD (SD-AR) or HD (S2016) aspect ratio. By default it is set to
Manual.

Up_Prst_ActA

With this item you can manually change the currently active preset of channel A
in up converter mode. Can be any preset between 1 and 16. By default it is set to
1. All menu settings that are preceded with an '#Up' prefix are part of the preset.

UP_Prst_EditA

Here you can select which of the 16 selectable presets you want to edit for
Channel A in up converter mode. Changing this will not change the active preset,
unless the currently active preset is the same you are going to edit. All menu
settings that are preceded with an '#Up' prefix are part of the preset.

16

 | November 2021 | Issue 1.1.A

Summary of Contents for Synapse UXU500









































































Reviews:

No comments