EVS Synapse UXU500, Installation And Operation Manual, Page: 21 / 72

#V_delayA V-Delay setting allows adjustment of the vertical phase of the output
signal with respect to the selected reference input.
The V-Delay setting gives a delay in addition to the reference timing. For
example: if the V-Delay is set to 10 TV HD lines, the output signal will be
delayed by reference 10 TV HD lines. The signal is delayed
(advanced) with respect to the phase of the reference signal. The
available range is from 0 to a maximum of 1125 lines (dependent on I/O
format). The default setting is 0ln. The preset master for this is Out-Frmt,
hence the # prefix.
#H_delayA The H-Delay setting allows adjustment of the Horizontal phase of the
output signal with respect to the selected reference input.
The H-Delay setting gives a delay in addition to the reference timing. For
example: if the H-Delay is set to 10 pixels, the output signal will be
delayed by reference 10 pixels. The signal is delayed (advanced)
with respect to the phase of the reference signal. The available range is
from 0 to a maximum of 5124 pixels (dependent on I/O format). The
default setting is 0px. The preset master for this is Out-Frmt, hence the #
prefix.
#Freeze_A Freeze enables the capture of one Video Frame. The settings for Freeze
are On or Off. The default is Off.
#LPF_H_A With this setting, you can set the filters to fine-tune image quality in
vertically fast-motion video. Options are 0 (default), 1 and 2.
#LPF_V_A With this setting, you can set the filters to fine-tune image quality in
horizontally fast-motion video. Options are 0, 1, 2, 3 (default), 4, 5, 6 and
7.
#K4_Down_LPF_A This sets the lowpass filter settings for 4K down convert mode. Can be
Off, Low, Medium or High. Default is Low.
When the card is in Transparent mode, the filters will be entirely bypassed.
#VANC_Trans_A Enables or disables the transfer from input to output of selected Vertical
Ancillary (VANC) lines. When the input format is the same as the output
format, the card is able to carry up to 6 lines containing packets inserted
in the Luminance Channel of the Vertical Ancillary space to the output.
With settings #VANC_Trans_Ln0 to #VANC_Trans_Ln5 the user may
select which lines to carry through to the output. The possible settings of
#VANC_TransA are On or Off. The default setting is Off.
#VANC_Trans_Ln0A ~
#VANC_Trans_Ln5A
Selects a line to carry from input to output. You can choose 5 lines. Refer
to #VANC_TransA. Can be any line from line 7 through 41. If for instance
line 7 is selected, line 7 from the input is carried to line 7 at the output.
Pos-Prst_Act Selects the active preset to control the positions #H-Pos-A, #V-Pos-A,
#H-Pos_B and #V-Pos-B. Here you can select which of the 8 selectable
positioning settings presets you want to activate. Default setting is 1.
INSTALLATION AND OPERATION MANUAL
Synapse UXU500-510 | 5. Settings Menu | 13