EVS Synapse UXU500, Installation And Operation Manual, Page: 20 / 72

#Inp_SelA With this item you can select which input you want to use for Channel A.
It is possible to select physical inputs:
SDI-1 Zoneplate
SDI-2 Colorbar
SDI-3 SDI-4K
SDI-4
You can also choose a Zoneplate or Colorbar as input. The default for this
setting is SDI-1.
#Out-FrmtA With Out-Frmt you can set what the output should be. Possible settings
are:
• 1080i60 (default) • 1080i50
• 2160p60 • 2160p50
• 1080p60 • 1080p50 • 1080p30
• 1080p25
• 720p60 • 720p50 • 720p30
• 720p25
• SD525 • SD625
#Output_Map_A This sets the output mapping of channel A. Level-A and Level-B are the
possible settings. Level-A is default.
#4K_Map_A This sets the 4K mapping. Currently the options are 4Ch-4Quadrants or
4Ch-SI. Default is 4Ch-4Quadrants.
#Out-Mode Sets the output mode. Currently fixed to A Only.
#F_delayA F-Delay sets the number of delayed Frames. The available range is from
0 to 25 frames (dependent on the I/O). Default is 0F. The preset master
for this is Out-Frmt, hence the # prefix.
Input format Output format Maximum F-delay
i50/i60 i50/i60 25fr
i50/i60 p50/p60 50fr
i50/i60 p25/p30 25fr
p25/p30 p50/p60 50fr
p25/p30 p25/p30 50fr
p25/p30 i50/i60 50fr
p50/p60 p50/p60 50fr
p50/p60 p25/p30 25fr
p50/p60 i50/i60 25fr
12 | November 2021 | Issue 1.1.A