EVS Synapse GMD100, Installation And Operation Manual

Page: 22 / 48

R-GainA R-GainA controls the Red gain. The control range is between 50% and 150%. The
default setting is 100%.
G-GainA G-GainA controls the Green gain. The control range is between 50% and 150%. The
default setting is 100%.
B-GainA B-GainA controls the Blue gain. The control range is between 50% and 150%. The
default setting is 100%.
BlackA BlackA controls the total R-G-B Black gain. The range is between –128bit and 127bit.
The default setting is 0bit.
R-BlackA R-BlackA controls the Red-Black. The control range is between –128bits and 127 bits
in steps of 1 bit. The default setting is 0 bit.
G-BlackA G-BlackA controls the Green-Black. The control range is between –128bits and 127
bits in steps of 1 bit. The default setting is 0 bit.
B-BlackA B-BlackA controls the Blue-Black. The control range is between –128bits and 127 bits
in steps of 1 bit. The default setting is 0 bit.
5.4. Audio Proc Amp
Setting Description
Audio-PhaseA If this setting is set to Align, the card ensures audio-phase alignment between
multiple audio channels and audio groups, which is necessary for multi-channel
(surround) purposes. If errors in the signal-chain occur the de-embedder blocks
reset synchronously to maintain audio-phase-alignment.
If this setting is set to Off, the card eats-all audio including errors. Even if there
are DBN/ANC/ECC or channel-sequence errors, the de-embedder will pass
them. Be aware that audio-phase-alignment between multiple audio channels
and audio groups can not be maintained if this setting is set to Off.
This setting can be helpful to solve problems in the field using equipment which doesn’t
follow the standards correctly.
5.5. Embedder
Setting Description
Audio_CtrlA With this item you select how audio proc amp presets for Channel A are
controlled: Manually (Manual) or via GPI-triggers (GPI-A, GPI-B or GPI-C).
Default is
Manual .
14 | November 2021 | Issue 1.0.C