EVS Synapse GMD100, Installation And Operation Manual

Page: 18 / 48

5. Settings Menu
5.1. Introduction
The Settings menu displays the current state of each GMD100 setting and allows you to change or
adjust it.
Settings can be changed using the front panel of the Synapse frame (SFR18, SFR08 or SFR04) or with
Cortex. The SCP08 control can also be used. Please refer to "Quick Start" on page 3 for information on
the Synapse front panel control and Cortex.
All items preceded with a # sign are part of the presets.
5.2. System Settings
Setting Description
IO-Ctrl This card has separate presets for the input and output settings under
the ‘SYSTEM SETTINGS’ header. With this item you select how the IO
presets are controlled: manually (Manual) or via GPI-triggers (GPI-A, GPI-
B or GPI-C). By default it is set to Manual.
IO_Prst_Act With this item you can manually change the currently active IO settings.
Can be any preset between 1 and 16. By default it is set to 1. All menu
settings that are preceded by the # prefix under the ‘SYSTEM SETTINGS’
header are part of the preset.
IO_Prst_Edit Here you can select which of the 16 selectable IO settings presets you
want to edit. Changing this will not change the active preset, unless the
currently active preset is the one you are going to edit. All menu settings
that are preceded by the # prefix under the ‘SYSTEM SETTINGS’ header
are part of the preset.
PrstEditView With this setting set to Follow Active, the edit preset settings (e.g. UP_
Prst_editA and UP_Prst_editB) will follow the active preset when the
active preset is changed. This is to avoid confusion when changing the
active preset. Set to Independent, the edit preset will not automatically
follow active preset changes. By default set to Follow Active.
10 | November 2021 | Issue 1.0.C