EVS LSM-VIA User Manual Download Page 76

Page: 76 / 276

•

Conditional

: the playlist is loaded on a single PGM when the selected Channel Control mode is Multi

PGM controlling a single PGM. Otherwise, it is loaded in PGM+PRV.

See section "Loading a Playlist" on page 218.

PGM+PRV / Multi-PGM

The parameter is used to select the Channel Control mode.

It reflects the currently selected Channel Control mode.

See section "Selecting the Channel Control Mode" on page 19.

Mark Live / Playback

The parameter is used to determine how the mark points will be set.

•

Live: mark points are set on all the record trains, at the LIVE input timecode of the train loaded on the
smallest controlled PGM.

•

Playback: mark points are set at the current timecode of the clip or the train loaded on the smallest
controlled PGM.

See sections "Managing Mark Points on Trains" on page 57 and "Managing Mark Points on Clips" on
page 105.

Specific Functions Buttons (4)

This area provides buttons giving quick access to specific functions.

From the current version, only the following buttons are available:

Add to Shotbox

This button is used to enter the Shotbox Edit mode.

The

Add to Shotbox

function allows users to quickly map the clip CAM angle loaded on the smallest

controlled PGM to a Shotbox button.

See section "Adding Media to the Shotbox" on page 248.

Edit Metadata

This button is used to enter the Metadata screen and to edit the metadata of the loaded clip.

See section "Adding Metadata to a Clip" on page 108.

Export Clip

This button is used to export clips to VIA Xsquare targets.

See section "Exporting Clips" on page 127.

Push

This button is used to enter the Push screen.

See section "Pushing Clips to Network Servers" on page 254.

| January 2022 | Issue 1.4.G

Summary of Contents for LSM-VIA





















































































































































































































































































Search results

Summary of Contents for LSM-VIA

Reviews:

Brands by name

Popular brands

EVS LSM-VIA, User Manual

Search results

Summary of Contents for LSM-VIA

Reviews:

Brands by name

Popular brands