EVS LSM-VIA User Manual Download Page 35

Page: 35 / 276

Channel Control in PRV-Only Mode

How to Control PRV-Only Mode

•

To control only the PRV, press the

PRV

key on the right operational block:

Display on Remote Panel with PRV Control

•

The OSD displays LEVER CTRL on the PGM monitor and FULL CTRL on the PRV monitor.

•

On the right operational block,

PRV

is displayed on a yellow background and the corresponding

PRV

key blinks red.

Channel Control in All PGM Mode

How to Control All PGMs

•

When you enter the Multi-PGM control mode, all PGM channels are controlled by default.

•

When you are in one PGM control, press the All key on the left operational block to regain the control
of all PGMs:

USER MANUAL

LSM-VIA | 3. Defining Channel Control |

Summary of Contents for LSM-VIA





















































































































































































































































































Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands

EVS LSM-VIA, User Manual

Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands