EVS LSM-VIA User Manual Download Page 34

Page: 34 / 276

•

When you are in PRV-only control, press the

PRV

key to take control on both PGM and PRV:

Display on Remote Panel with PGM+PRV Control

•

The OSD displays FULL CTRL on both PGM and PRV monitors.

•

On the right operational block,

PGM

and

PRV

are displayed on a yellow background (active) and the

corresponding

PGM

and

PRV

keys are steady red (active).

Channel Control in PGM-Only Mode

How to Control PGM-Only Mode

•

To control only the PGM, press the

PGM

key on the right operational block:

Display on Remote Panel with PGM Control

•

The OSD displays

FULL CTRL

on the PGM monitor and

NO CTRL

on the PRV monitor.

•

On the right operational block,

PGM

is displayed on a yellow background and the corresponding

PGM

key blinks red.

| January 2022 | Issue 1.4.G

Summary of Contents for LSM-VIA





















































































































































































































































































Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands

EVS LSM-VIA, User Manual

Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands