To clear the
LSM ID
field: press
on the console or tap
on the
touchscreen.
4.
Validate your action: press
on the console or tap
on the touchscreen.
Clips:
When the clip LSM ID does not exist, the field displaying the LSM ID turns red and the Remote Panel
beeps.
When the LSM ID exists, the clip angles are loaded on the controlled play channels taking the controlled
PGMs and preferred CAMs into account.
Playlists:
If the recalled playlist is empty, you have the possibility
•
to immediately set it as the active playlist.
•
to copy the currently active playlist into the recalled playlist and set this latter as active.
The recalled playlist becomes the active playlist, provided that it is not a remote playlist.
To leave the Recall screen without recalling a media
•
tap
on the upper left corner, or
•
press
on the Remote Panel.
8.1.4.
Recalling Media by LSM ID from the LSM-
VIA Viewer
Introduction
From the LSM-VIA Viewer, you can easily load a local or remote train or clip, or you can make a playlist
active by simply typing its LSM ID.
Writing Rules for a Train LSM ID
•
to load a local train: type the LSM ID without network number, e.g.
b
.
•
to load a remote train: type the LSM ID and the network number of a remote server, e.g.
b/03
or
b/3
.
234
| January 2022 | Issue 1.4.G
Summary of Contents for LSM-VIA
