EVS LSM-VIA User Manual Download Page 180

Page: 180 / 276

7.3.10.

Flattening a Playlist

Introduction

Active playlists can be flattened to the local EVS video server.

The

Flatten Playlist

function is available from the Live Screen. It can also be mapped to an assignable

Shortcut key of the Remote Panel. See section "Commands from the Assignable Shortcut Keys" on page
37.

Audio swaps and AUX clip are taken into account in the flattened file.

Prerequisite

VIA Xsquare has been configured from the Infrastructure Settings and it can be joined.

How to Flatten the Active Playlist from the Remote Panel Live Screen

From the Live screen, tap the

Flatten Playlist

button:

The Flatten screen opens on the touchscreen.

On the numeric pad, enter the location to flatten the playlist to in one of the following ways:

◦

type a single digit: the flattened playlist will be saved on the first available slot of the selected
page.

168

| January 2022 | Issue 1.4.G

Summary of Contents for LSM-VIA





















































































































































































































































































Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands

EVS LSM-VIA, User Manual

Search results

Summary of Contents for LSM-VIA

Reviews:

Related manuals for LSM-VIA

Brands by name

Popular brands