GX server – Version 1.10 – User Manual
EVS Broadcast Equipment – September 2012
Issue
1.10.D
21
Setting
Description
selected video standard will be visible to the protocol clients.
COM Port
Serial port number on the external controller through which the
GX server will communicate.
Protocol
Protocol the GX server will use to communicate with the
controller. See also section 2.3.4 'Controller', on page 11.
VDCP Version
Version of the VDCP protocol to be used in communications
between the server and the controller. Available versions are:
'2000', '1998'.
This field will not be displayed when a protocol other than the
VDCP protocol is selected in the
Protocol
field.
Genlock Phase
Phase of the genlock input on the GX server video board.
Enable OSD
Tick the check box to activate the OSD (status screen) on the SDI
output of the GX server.
Advanced Log
Tick the check box if you want advanced information to be
included in the default logs.
4.2.4
Server Status Information
The following server status information is displayed on the right side of the Server Control
window.
