Evoqua WALLACE & TIERNAN SFC, Original Instruction Manual

Page: 177 / 288

SFC
Operation
6.
177
Menu - Module type
Please note
The displayed menus and selection parameters depend on the
number of sensor measuring modules installed and the selected
application. All the parameters illustrated here are not displayed at
the same time.
Basic display
Refer to main menu
Menu select
Display of all available menus
Module type (2) menu
Display of all available settings for module type 2
Control
Setup
Measuring range
Adjustment of measuring range initial value:
Adjustment of the measuring range end value:
Limit value
Control output OFF
Dosing contact
Hysteresis Depending on measuring range
0.01 – 0.50 / 00.1 – 5.0 / 1 – 50
min. ON 1min00s – 59min59s
Control direct direct/inverse
Range start
pH
pH 0.00 – 5.00
Range end
pH
pH 9.00 – 14.00
Min within measuring range
Max within measuring range
Hysteresis Depending on measuring range
0.01 – 0.25 / 00.1 – 05.0 / 1 – 50