Evolveo Ringo DB2, Manual, Page: 46 / 79

46
app. The alternative for a new device recognition is
selecting the “discover devices” button.
6) The recognized devices will be displayed in the list.
Note: Whenever you rename the device in the Smart
Life app, Echo will need new pairing.
Removing the Doorbell from the Application
In Settings, go fully down and select Remove Device. This
will delete all records and settings. Records on the SD
card will be preserved.
Doorbell Resetting
Remove the device from the list of devices in the
application, then press and hold the Reset button on the
rear side until you hear a beep. The doorbell switches to
the pairing mode again. Any records in the application
will be lost; therefore, consider backing them up/saving
them in the application or phone library if necessary.
Records on the SD card will be preserved.
Technical Support
Contact Technical Support EVOLVEO:
www.evolveo.eu/helpdesk/
The warranty DOES NOT APPLY to:
- using the device for different purposes
- instal lation of a different firmware than the one
installed in EVOLVEO Ringo DB2 or one which can
be manually or automatically downloaded from the
device menu
- electromechanical or mechanical damage caused by
improper use
- damage caused by natural elements such as fire,
water, static electricity, voltage surges, etc.
- damage caused by unauthorized repair