Evolution EVOBRIGHT SINGLE, Installation And Operation Manual, Page: 5 / 8

3
4.0
INSTALLATION INSTRUCTIONS
4.1
The Transformer is mounted using the two keyhole slots (93mm centres) on the back of the
enclosure (Fig. 3). A mounting template can be found on the last page of this manual. Drill
mounting holes for the supplied screws and wall plugs using the template as a guide.
4.2
Mount the Transformer at a minimum of 500mm above ground level. Multiple units should
be mounted at a minimum of 200mm from each other (Fig. 4) and a minimum distance of
500mm from any other electrical equipment or device.
4.3
Connect the LED Pool Light Power Wires to the Electrical Terminal Connector and tighten the
screws sufficiently to hold the wires securely (Fig. 2).
4.4
Firmly insert the wired Electrical Terminal Connector into the Terminal Socket.
MOUNTING KEYHOLE SLOT
MOUNTING SCREW
WALL PLUG
93 mm
Fig. 3
200 mm 200 mm 200 mm 200 mm
MASTER
POWER OUTLET
SLAVE
500 mm
Fig. 4