Evolution EB225DWSHH Instruction Manual Download Page 10 | Manualshive

Page: 10 / 18

Evolution EB225DWSHH Instruction Manual Download Page 10

www.evolutionbuild.com

10

Note:

All or some of the following symbols

may appear in the manual or on the product.

Symbol

Description

V

Volts

A

Amperes

Hz

Hertz

Min-1

Rated speed

~

Alternating Current

n

o

No Load Rated speed
Double Insulated
Wear Safety Goggles
Wear Ear Protection

INTENDED USE OF THIS POwER TOOl

waRNINg:

This product is a Drywall

Sanding Machine and has been designed to
be used with most commercially available
sanding discs. Only use sanding discs
designed for use in this machine and/
or those recommended specifically by

Evolution Power Tools ltd.

when fitted with a correct abrasive
sanding disc this machine can be used
to sand:

• Drywall walls and ceilings.

waRNINg:

This machine is not suitable for

sanding materials that may contain asbestos
or lead based products.

PROHIBITED USE OF THIS POwER TOOl

waRNINg:

This product is a Drywall

Sanding Machine and must only be used as
such. It must not be modified in any way,
or used to power any other equipment or
drive any other accessories other than those
mentioned in this Instruction Manual.

waRNINg

: This product is not intended

for use by persons (including children)
with reduced physical, sensory or mental

capabilities, or lack of experience and
knowledge, unless they have been given
supervision or instruction concerning
the safe use of the product by a person
responsible for their safety and who is
competent in its safe use.

gETTINg STaRTED

UNPaCKINg

Caution:

This packaging contains sharp

objects. Take care when unpacking. Remove
the machine, together with the accessories
supplied from the packaging. Check carefully
to ensure that the machine is in good
condition and account for all the accessories
listed in this manual. Also make sure that all
the accessories are complete. If any parts
are found to be missing, the machine and
its accessories should be returned together
in their original packaging to the retailer. Do
not throw the packaging away; keep it safe
throughout the guarantee period. Dispose
of the packaging in an environmentally
responsible manner. Recycle if possible. Do
not let children play with empty plastic bags
due to the risk of suffocation.

ITEMS SUPPlIED

DESCRIPTION

QUaNTITy

Instruction Manual

1

Sanding Discs (assorted)

8

Dust Extraction Hose

1

Side Assist Handle

1

Dust Bag

1

Hose Adaptor

1

Carry Belt

1

Replacement Carbon Brush
Set (power)

1

Hex Key 5mm

1

gETTINg STaRTED

UK

BUILD

®

«
...
8
9
10
11
12
...
»

Summary of Contents for EB225DWSHH



















Reviews:

No comments