EVOC P12 Series, Manual

Page: 22 / 131

Installing the Product
P12 SERIES · 13 ·
Material Square hole Mounting
Metal sheet type (minimum
thickness:1.5mm)
290.6mm×238.6mm
Tighten from the rear with the
hook (accessories)
Warning
Make sure the wall or the ceiling or the carrier can bear the load four times as heavy as
the total weight of the PC(including the cabinet rack and additional expansion modules).
3.2.2 VESA Standard Supporting Arm Installation
Step:Use screws to fasten the PC
onto the supporting arm,as shown
in the left picture.
Note:During the installation, use
the screws that come with the PC
or select screws according to the
user manual.
Warning
The weight bearing capacity of VESA supporting arm should be at least twice the weight
of the PC.