Appendix
MEC-5031-M SERIES
· 73 ·
12. Appendix
12.1 Troubleshooting and Solutions
Common
Malfunctions
Reasons
Troubleshooting and Solution
No power supply
Please check the power supply
and the power cable/connector.
The device is not
conditions;
operating
Improper device
1. Check with the environment
2. Please wait for twelve hours
fore powering on the device
shipped in cold weather.
operating environment
be
The display has not been
turned on
Turn on the display
The display is under
“power saving” mode
Press any key on the keyboard.
The luminance control is
set to “Black”.
Increase the screen luminance
by luminance control. Please
refer to the instructions of the
display for detailed information.
The external
display is black
Power cable or display
cable is not conne
1. Please check whether the
power cable is correctly
connected with the display, the
system unit or th ground port.
lease check whether the
display cable is correctly
connected with the display and
the system unit.
cted
2. P
e
Summary of Contents for MEC-5031-M Series
