EVOC EC0-1816 Series, User Manual

Page: 84 / 128

Installation Instructions
- 14 - EC0-1816(B) SERIES
2.13 GPIO Port
Pin Signal Name Pin Signal Name
1 INPUT0 2 OUTPUT0
3 INPUT1 4 OUTPUT1
5 INPUT2 6 OUTPUT2
7 INPUT3 8 OUTPUT3
GPIO1
(pitch: 2.0mm)
9 GND 10 NC
Note: The factory GPIO Default is TTL input/output, and the voltage range of
input/output signal is 0 ～ 5V. By JP10, OUTPUT[3:0] can be configured as default
level, and default level of INPUT[3:0] can be configured as High 5V.
2.14 SMBUS1 Port
Pin
Signal Name
1 GPO
2 SMB_DATA
3 SMB_CLK
4 GND
SMBUS1
(pitch: 2.0mm Wafer)
5 +5V
2.15 GPE1 Port
Pin Signal Name
1 SCI-
GPE1 (pitch: 2.0mm)
2 GND