Evinrude & Johnson E75DPLSCB, Service Manual, Page: 103 / 349

101
ENGINE MANAGEMENT MODULE (EMM)
DIAGNOSTIC SOFTWARE FUNCTIONS
5
Software Replacement
Engine Management Software programs are
loaded into the
EMM at the factory. Periodically, a
new program may be available to enhance the
operation of an outboard. Select
Engine Software
Update from the Utilities menu and refer to the
instructions provided with the program.
IMPORTANT:
Software replacement requires a
“Bootstrap” Tool, P/N 586551.
EMM
Transfer
EMM Transfer is used to save engine history data
when the EMM must be replaced. Select EMM
Data Transfer from the Utilities menu. Select the
Collect EMM data to FILE option and follow the
instructions provided with the program.
IMPORTANT:
Whenever the EMM is replaced,
EMM timing must be synchronized to crankshaft
position. Refer to
TIMING ADJUSTMENTS
on
p. 142.
006541
002383