Evidence Cross-8/HPoE-10G, User Manual

Page: 101 / 321

5-6 IP Subnet-based VLAN
The IP subnet-based VLAN entries can be configured here. This page allows for adding,
updating and deleting IP subnet-based VLAN entries.
Web Interface
To configure IP subnet-based VLAN Membership to configured in the web interface:
1. Click VLAN Management and IP Subnet-based VLAN.
2. Click “Add New Entry”.
3. Specify IP Address, Mask Length, VLAN ID.
4. Click Apply.
Figure 5-6: IP Subnet-based VLAN Membership Configuration
Parameter description:

IP Address :
Indicates the IP address.

Mask Length :
Indicates the network mask length.

VLAN ID :
Indicates the VLAN ID. VLAN ID can be changed for the existing entries.

Port Members :
A row of check boxes for each port is displayed for each IP subnet to VLAN ID mapping
entry. To include a port in a mapping, simply check the box. To remove or exclude the port
from the mapping, make sure the box is unchecked. By default, no ports are members and
all boxes are unchecked.
Buttons

Delete :
To delete a IP subnet-based VLAN entry, check this box and press save. The entry will be
deleted on the selected switch in the stack.