19
Maintenance
Maintenance Schedule
WARNING:
Failure to follow these maintenance instructions could result in serious injury and damage
to the SnoCobra ski system.
Strapping System
The strapping system is susceptible to wearing. If any part of the strapping system becomes
torn, cut, frayed, or damaged, it MUST be replaced.
If any hardware component of the strapping system is bent, broken, or damaged, the whole
strapping system must be replaced.
Inspection of the strapping system must take place before every installation, and before every
operation of the ski system.
Preventative maintenance should take place by making sure that your strapping system:
1.
Does not rub on any rigid components during installation and use.
2.
Does not receive more tension pressure than is recommended in the installation
settings of the installation instructions.
3.
Is stored in such a manner that does not cause damage or cutting of the
strapping system.
Saddle Brackets
If the saddle brackets have been broken, bent, or worn in a fashion that compromises system
safety and rigidity, they must be replaced.
Ski Handle
If any part of the ski handle breaks, cracks, or becomes worn in a fashion that affects the rigidity
of the ski system or the locking pin from fitting into the handle, the handle must be replaced.
Wear Bars and Pads
The wear bars and wear pads are considered “wear” items. These components will become
worn from use. Contact from hard surfaces and objects will cause these components to wear at
a faster rate. Once the welded portion of the wear bar has been ground off or the wear pad
carbide has been worn down, they must be replaced.
Notice:
Damage to skis will occur without
functioning wear bars and wear pads.
