13
It is important to note that the strapping adjustment varies between uses (tire pressure, temperature,
tire tread wear, strap system falling out of adjustment) and therefore must be re-adjusted before every
use
Installation Instructions
Read ALL Instructions before use.
a.
Verify SnoCobra Ski system has been properly assembled as shown in Section A.
b.
Verify SnoCobra Ski system settings are adjusted to proper tire size section B.
c.
For components identification, see section A.
1.
Place ONE ski in front of passenger’s side tire, with strapping system lying to the outside
position of the ski and vehicle.
2.
Drive vehicle’s front passenger tire into the saddle until the tire pushed up against the front
cross plate. DO NOT put vehicle in 4WD during operation.
3.
With the vehicle in park, put the strapping system around your tire. The strapping system
should be centered over the tire.
