evertz MViP-II User Manual Download Page 66

Page: 66 / 102

MViP-II

IP Based Multi-Image Display & Monitoring Solution

Page - 56

Revision 1.2

6.4.5.1.

Source Cycle Tab (+CCA)

Figure

6-42 : Source Cycle Tab – Part 1

Source Cycle Timing

These settings are used to set the cycle speed duration in

seconds

. The user can then select the desired

cycle time, Slow or Medium or Fast, for each source cycle on the input in the Source List section.

Depending on the number of sources in the cycle, the amount of time for switching between the sources
will change.

Source List

For the 64 inputs

Run Source Cycling:

This control is used for enabling the source cycling. If not enabled, the source

selected in the Input Control will be used.

Cycle Speed:

This control is used to select the cycle speed. Options are Slow, Medium and Fast as

configured in the Source Cycle Timing section.

Num Sources:

This control is used to set the number of sources for the source cycle on the input and

used for configurations in the Source List section.

Summary of Contents for MViP-II







































































































Search results

Summary of Contents for MViP-II

Reviews:

Related manuals for MViP-II

Brands by name

Popular brands

evertz MViP-II, User Manual

Search results

Summary of Contents for MViP-II

Reviews:

Related manuals for MViP-II

Brands by name

Popular brands