MViP-II
IP Based Multi-Image Display & Monitoring Solution
Revision 1.2
Page - 39
6.2.1.1.
Video widget
The video widget section is used to decode Multicast IP streams.
The user can assign a video source by clicking the file reel to the left of widget while it’s not in edit mode.
While it is in edit mode, for selecting the source, simply double click on widget then select source tab and
select the source that is going to be assigned to this widget.
The video can be enlarged by clicking the full screen icon on the right of widget.
6.2.1.2.
Audio Bars Widget
The Audio Bars widget is used to critically monitor levels of audio programs.
This widget can monitor:
•
Mono to 7.1 channels of program audio
•
Up to 8 audio PID’s per source
•
Selected audio to speakers by clicking headphone icon
This widget allows the user to assign source to audio bars by clicking on film reel icon. And also allows the
user to link to a video widget to display incoming data on the selected video source.
6.2.1.3.
Closed Captioning widget
The closed captioning widget is used for decoding closed caption data embedded on an incoming video
source.
Figure
6-16 : Closed Captioning Widget
This section allows the user to link/associate the Closed Captioning widget to a Video widget in order to
display incoming data on the selected video source.
6.2.1.4.
Subtitles widget
The Subtitle widget is used for decoding the subtitle stream accompanying the incoming IP-based video
source.
