MViP-II
IP Based Multi-Image Display & Monitoring Solution
Revision 1.2
Page - 31
Figure
6-5 :
General Settings\Display Configuration
Automatic Mode
It performs same functionality for both Headless and Connected display modes. It will automatically detect
whether two displays are connected or single displays is connected with MViP-II and it will select highest
resolution from the list for both displays.
Manual Mode
In manual mode there is the possibility to adjust display configuration manually. There are two options to
select display layout, Single display and Dual display.
In manual mode, the user can see current resolution applied to both displays if there are two displays
connected.
It is possible to apply separate resolution for both displays. In Headless mode some of the standard
resolutions will be available in this list. In manual mode, the user can select resolutions supported by
particular display device which is connected to MViP-II.
The display can be rotated. Rotation schemes are Normal, Inverted, Left and Right.
After making any changes, it is needed to press “Apply Changes & Restart” to take effect the changes.
