HD9010TM High Definition Time Code Master Manual
Page 3-16
Revision 2.4.1
OPERATION
3.4.9. Configuring how the Continuous Jam Sync Mode Works when there is no Primary
Reader Code
GEN NO CODE JAM
The
GEN NO CODE JAM
item controls the operation of the continuous
jam sync mode when there is no incoming code to the primary reader.
Select
No code jam run
when you want the generator to free run when
there is no incoming Reader code. When the reader code resumes, the
generator will re-jam to the incoming code. Using this mode will allow
the user to repair large dropouts in the incoming code. The generated
code will be continuous if the incoming code is also continuous.
Select
No code jam hold
when you want the generator to stop when
there is no incoming Reader code. When the reader code resumes, the
generator will re-jam to the incoming code. Use this mode if you want
the output of the generator to stop on the last number read when you
stop the tape machine supplying the incoming code to the reader.
Select
No code jam mute
when you want to turn off the generator when
there is no incoming Reader code. The generator time will stop at the
last number read. When the reader code resumes, the generator will
turn on and re-jam to the incoming code. Use this mode if you want the
output of the generator to turn off completely when you stop the tape
machine supplying the incoming code to the reader.
No code jam: run
No code jam: hold
No code jam: mute
3.5.
CONFIGURING THE READERS
The
READER SETUP
menu is used to set up various items related to the input references of the
HD9010TM. The chart below shows the items available in the
READER SETUP
menu. Sections 3.5.1
to 3.5.5 give detailed information about each of the sub-menus.
PRIMARY READER
Sets the primary reader.
ATC RDR TYPE
Sets whether the ATC reader will read LTC or VITC RP188 packets or
VANC data packets.
ATC RDR MODE
Sets the operating mode of the ATC reader.
LTC RDR MODE
Sets the operating mode of the main LTC reader.
AUX LTC RDR MODE
Sets the operating mode of the auxiliary LTC reader.
Table 3-2: Top Level of the Reader Setup Menu