evertz EQT-1616-3G-C, User Manual

Page: 69 / 102

EQT-1616-3G-C-C
EQT 12G/3G/HD Router
Page 57
In case Individual GPI is selected:
Route Enable: This field is used to enable/disable the four routes in each GPI pin.
Route SRC: This field is used to define the source channel for the route.
Route DEST: This field is used to define the destination channel for the route.
In case Encoded GPI is selected:
Dest Enable: This field is used to enable/disable the GPI pins.
Dest for Encoded Src: This field is used to define the Destination channel (1-16) from the encoded
source (detailed in Section 4.4.3)
7.8.2. GPO
Enable:
This field is used to enable/disable the GPO port.
Orientation: This field is used to set the GPO orientation, whether it is ‘Normally Opened’ or ‘Normally
Closed’.
Encoded: This field is used to select whether the GPO is to be encoded to work individually (set as
‘Individual’) or collectively (set as ‘Encoded’).
In case ‘Individual’ GPO is selected:
GPO Enable: This field is used to enable/disable the set of GPOs
GPO Function: This field is used to set which alarm is to be activated: Temperature Fault, Video Src
Missing, Video Route Selected and PSU Fault.
In case ‘Encoded’ GPO is selected:
Dest for Encoded Src: This field is used to define the destination channel (1-16), in which the source
will be displayed through GPO (detailed in Section 4.4.3).

NOTE: The device must be rebooted in order for the changes to take effect.